OPIS:
Revox A77 w wersji MKIV rok produkcji 1974. Wersja 2 Track.
REVOX PERFORMANCE SPECIFICATIONS
FOR REVOX A77 MK I / REVOX A77 MK II / REVOX A77 MK III / REVOX A77 MK IV
Mechanical
Tape Transport
Three Studer eddy current motors. Electronically governed capstan motor. Electronic speed change. Solenoid operated via 3 relays.
Tape Speeds:
3.75 and 7.5 ips (9,5 cm and 19 cm/sec.) ± 0.2%
High speed Version: 7.5 and 15 ips (19 cm and 38 cm/sec.) ± 0.2%
Wow and Flutter:
max. ± 0.04% at 15 ips
max. ± 0.08% at 7.5 ips
max. ± 0.1% at 3.75 ips (Weighted at DIN Standard 45507)
Tape Slip:
Less than 0.2%
Reel Diameter
Maximum 10.5\" (26,5cm)
(Minimum hub diameter 23/8 inches)
Forward / Rewind
Fast winding time for 1800\' (1100m) is 92 seconds
Tape Heads
Three (Separate precision erase, record and playback heads.) Patented \'True Radius\' design ensures excellent S/N ratio and head wrap
Guide System:
The Heads, the capstan drive, and the machines tape guides are mounted to a one-piece casting to maintain precise alignment.
Operating position:
horizontal or vertical
Electrical
Monitoring
Individual stereo record and playback heads with separate preamps, plus separate record and play circuits permit full source-tape monitoring.
Equalization:
NAB Standard on both record and playback at all speeds.
IEC Standard switchable on playback only.
Record Playback
Frequency Response:
(Based on Revox 601)
15 ips - 30 Hz - 20 kHz ± 1.5 dB
7.5 ips - 30 Hz - 20 kHz + 2 / - 3 dB
3.75 ips - 30 Hz - 16 kHz + 2 / - 3 dB
Signal to noise:
2-Track:
15 ips - better than 66 dB
7.5 ips - better than 66 dB
3.75 ips - better than 63 dB
4-Track:
15 ips - better than 62 dB
7.5 ips - better than 62 dB
3.75 ips - better than 59 dB
Add 4 dB to the above figures with Dolby on, referenced to less than 2% THD
(Reference with Scotch 203 or Revox 601 or equivalent. Weighted as per CCITT C-curve to exclude supersonic bias noise.)
Distortion at full modulation
at 1 kHz:
Max. 2% at 15 ips and 7.5 ips.
Max 3% at 3.75 ips.
Crosstalk at 1 kHz:
Stereo, better than 45 dB
Mono, better than 60 dB
Bias frequency:
120 kHz, push-pull oscillator. Designed for low noise, high output tapes
Input sensitivity per channel
Microphone, switchable LOW/HIGH
LOW: 50 - 600 ohms (unbalanced) 15mV
HIGH: up to 100 K ohms 2.5 mV
RADIO: 33 K ohms 2.5 mV
AUX: 1 M ohms 33 mV
Output per channel
OUTPUT: max 2.5 rms @ 600 ohms
RADIO: max 1.2 rms @ 2.5 K ohms
PHONES: 200 - 600 ohms (no electrostatic)
Semiconductor complement:
54 Transistors; 32 diodes, 4 silicon rectifiers, 1 CdS-cell
Remote control:
Fully electric for all operation functions.
Output Amplifiers:
Plug-in optional. 2 x8 watts continuous rms power, 2 x10 watts music power as per IHFM, 4-16 ohms, less than 1% distortion.
Power Supply:
Electronically stabilized.
Mains voltages:
110, 130, 150, 220,240, 250V / 50-60 Hz.
Power consumption:
70 ... 100 watts
Dimensions:
(Wooden Cabinet)
161/4\" W x 141/8\" H x 81/2\" D.
(Measurements include knobs but not reels.)
Weight:
Approximately 34 pounds (» 15 kg)
Zaloguj się by oceniać
Recenzje użytkowników
11-07-11
5.00
Uwaga
Wymien jak najszypciej te 4 kondy 0,47uF Rifa Miniprint bo zrobia ci zwarcie i strzela, sa wypelnione smola.
Mam 2 sciezkowego A77 MKII z 1969r. w stanei sklepowym w ktorym wlasnie padly te Rify, juz tydzien wietrze go na dworze i bardzo ciezko pozbyc sie tego zapachu.
02-02-10
Tamtego Revoxa sprzedałem był to 4 track a chciałem mieć właśnie 2 tracka więc postanowiłem zrobić zamianę wygląda może identycznie ale gra o wiele wiele lepiej :D jednak czuć różnice i wzrost dynamiki, w porównaniu do konstrukcji czterościeżkowych.
Pozdrawiam
02-02-10
5.00
maszyna pędząca - revox
piękny klasyk, mażą mi się szpulovce, mam tylko jednego. gratool.
01-02-10
5.00
widze drugi do kolekcji :)
musi się ładnie komponować z tym drugim REVOX, gratuluje widzę ze nie próżnowałeś :)
Zaloguj się by oceniać