Accuphase M-60
1975r.
Form Monophonic power amplifier
Output power
(20Hz - 20kHz, 0.03% or less of distortion) 450W (4ohms)
300W (8ohms)
150W (16ohms)
THD (20Hz - 20kHz) 0.03% or less (at the time of an Output power)
0.01% or less (at the time of a -3dB output)
0.05% or less (at the time of a 50mW output)
IM distortion 0.01% or less (at the time of an Output power)
Frequency response (8-ohm load) 20Hz-20kHz+0 -0.2dB (at the time of an Output power)
2Hz-150kHz+0 -3.0dB (at the time of 1W output)
Dumping factor (8-ohm load) 120(40Hz)
Input sensitivity/impedance 2.0V/100kohm
S/N ratio (input short-circuit, IHF-A) 115dB (at the time of an Output power)
Subsonic Filter 17Hz, 18 dB/oct
Power output meter Logarithm compression type
- It is a continuation Direct reading to 50dB (3mW) - +3dB (600W).
A peak level, with a volume level changeover switch
The semiconductor used Transistor: 47 pieces
IC: Three pieces
Diode: 51 pieces
Power supply voltage AC100V/117V/220V/240V, 50Hz/60Hz
Power consumption At the time of no inputting: 65W
At the time of a 4ohm load Output power: 800W
At the time of an 8ohm load Output power: 540W
Dimensions Width 482x height 170x depth of 345mm
Weight 27kg
Option A set of accessories (with a fan) O-81 (8,000yen)
Remarks Standard rack (19 inches) attachment is possible.
Rack-mounted pitch: 100mm (4 inches)
Rack bore (horizontal): More than 430mm (16 15/16 inches)